show lldp port command
The show lldp port command displays the LLDP port parameters.
The syntax for the show lldp port
command is:
show lldp [port <portlist> | all][local-sys-data {dot1 | dot3 |
detail | med }][rx-stats] [tx-stats] [pdu-tlv-size] [tx-tlv {dot1 |
dot3 | med | vendor-specific}] [neighbor-mgmt-addr] [neighbor {dot1 |
dot3 | detail | med }
Run the show lldp port command in Privileged EXEC command mode.
Table 91: show lldp port command variables
Variables Description
local-sys-data {dot1 | dot3 | detail
| med }
The organizationally-specific TLV properties on the
local switch:
• dot1: displays the 802.1
TLV properties
• dot3: displays the 802.3 TLV properties
• detail: displays all organizationally specific TLV
properties
• med: displays all med specific TLV properties
To display the properties of the optional management
TLVs, include only the local-sys-data parameter in the
command.
rx-stats The LLDP receive statistics for the local port.
tx-stats The LLDP transmit statistics for the local port.
pdu-tlv-size
The different TLV sizes and the number of TLVs in an
LLDPDU.
port <portlist> | all
Specifies an individual port, a list of specific ports, or all
ports on the switch.
tx-tlv {dot1 | dot3 | med | vendor-
specific}
Display which TLVs are transmitted from the local port
in LLDPDUs:
System configuration using ACLI
178 Configuration — System April 2011
To Next Page
Loading...
