Avaya 4526FX - Viewing LLDP Local Protocol Information Using EDM

Variable Value
PortNum Indicates the port number.
VlanId Indicates the integer value used to identify the IEEE
802.1Q VLAN IDs with which the given port is
compatible.
VlanName Indicates the string value used to identify the VLAN
name identified by the VLAN ID associated with the
given port
on the local system. This object contains the
value of the dot1QVLANStaticName object (defined in
IETF RFC 2674) identified with the given
lldpXdot1LocVlanId.
VlanNameTxEnable Specifies whether the corresponding Local System
VLAN name instance is transmitted from the port.
Viewing LLDP local protocol information using EDM
Use the following procedure to display LLDP protocol properties for the local system and to
enable or disable the transmission of this information from a specified port.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot1.
5. On the work area, click the Local Protocol tab.
6. To select a port to edit, click the port row.
7. In the port row, double-click the cell in the VlanNameTxEnable column.
8. Select a value from the list—true to enable transmitting local protocol information
from the port, or false to disable transmitting local protocol information from the
port.
9. Click Apply .
Variable definitions
The following table describes the Local Protocol tab fields.
System configuration using Enterprise Device Manager
304 Configuration — System April 2011