Variable Value
• interfaceName
• agentCircuitId
•
local
PortId Indicates the remote port ID.
PortDesc Indicates the remote port description.
Viewing LLDP neighbor management information using EDM
Use the following procedure to display LLDP management properties for the remote system.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostic tree, click 802.1AB.
4. In the 802.1AB tree, click LLDP.
5. In the work area, click the Neighbor Mgmt Address tab.
Variable definitions
Variable Value
TimeMark Indicates the TimeFilter for this entry.
LocalPortNum Indicates the local port on which the remote system
information is received.
Index Indicates the arbitrary local integer value used by this
agent to identify a particular MSAP.
An agent is
encouraged to assign monotonically increasing index
values to new entries, starting with one, after each
reboot.
AddrSubtype Indicates the type of encoding used in the associated
Addr object.
Addr Indicates the management address associated with
the remote system. The switch supports IPv4 and IPv6
management addresses.
System configuration using Enterprise Device Manager
298 Configuration — System April 2011
To Next Page
Loading...
