Avaya 4526FX - Configuring the Switch Call Server IP Address TLV Using EDM

Configuring the switch call server IP address TLV using
EDM
Use this
procedure to define the local call server IP addresses that switch ports can advertise
to Avaya IP phones.
You can define IP addresses for a maximum of 8 local call servers.
Important:
The switch does not support the advertisement of IPv6 addresses to Avaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Local Call Servers tab.
6. To select a port, click the CallServerNum.
7. In the port row, double-click the cell in the CallServerAddress column.
8. Type an IP address in the box.
9. On the toolbar, click Apply.
Variable definition
Variable Value
CallServerNum Displays the call server number.
CallServerAddressType Displays the call server IP address type.
CallServerAddress Defines the local call server IP address to
advertise.
System configuration using Enterprise Device Manager
338 Configuration — System April 2011