Avaya 4526FX - Viewing the Switch File Server IP Address TLV Configuration Using EDM

Important:
The switch does not support the advertisement of IPv6 addresses to Avaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Local File Servers tab.
6. To select a port, click the FileServerNum.
7. In the port row, double-click the cell in the FileServerAddress column.
8. Type an IP address in the box.
9. On the toolbar, click Apply.
Variable definition
Variable Value
FileServerNum Displays the file server number.
FileServerAddressType Displays the file server IP address type.
FileServerAddress Defines file server IP address to advertise.
Viewing the switch file server IP address TLV configuration using
EDM
Use
this
procedure to display information about the defined local file server IP addresses that
switch ports can advertise to Avaya IP phones.
Important:
The switch does not support the advertisement of IPv6 addresses to A
vaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Local File Servers tab.
System configuration using Enterprise Device Manager
340 Configuration — System April 2011