Avaya 4526FX - Disabling Global AES Poe Power Save Mode Using EDM

Prerequisites
Disable AES globally
.
Procedure steps
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Select the PoePowerSavingEnabled check box.
5. Click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.
Disabling global AES PoE power save mode using EDM
Use the following procedure to disable AES PoE power save mode for the switch.
When enabled,
AES PoE power save mode provides the capability to control power
consumption savings for only ports that have AES enabled, and PoE priority configured to
low.
Prerequisites
Disable AES globally.
Procedure steps
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Clear the PoePowerSavingEnabled check box.
5. Click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.
System configuration using Enterprise Device Manager
348 Configuration — System April 2011