Viewing the switch call server IP address TLV configuration using
EDM
Use this
procedure to display information about the defined local call server IP addresses that
switch ports can advertise to Avaya IP phones.
Important:
The switch does not support the advertisement of IPv6 addresses to Avaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Local Call Servers tab.
Variable definition
Variable Value
CallServerNum Displays the call server number.
CallServerAddressType Displays the call server IP address type.
CallServerAddress Displays the defined call server IP address.
Configuring the switch file server IP address TLV using
EDM
Use
this
procedure to define the local file server IP addresses that switch ports can advertise
to Avaya IP phones.
You can define IP addresses for a maximum of 4 local call servers.
Note:
If your Avaya IP Handset uses SIP, 802.1AB (LLDP) TLVs do not provide all information for
the IP Phone. You must specify a file server IP address TLV so the IP phone can download
the SIP configuration information, because the IP Phone retrieves information related to the
SIP domain, port number and transport protocol from the file server.
Configuring the switch file server IP address TLV using EDM
Configuration — System April 2011 339
To Next Page
Loading...
