Avaya 4526FX - Displaying Ipv6 TCP Listeners Using EDM

Variable definitions
Use the data in the following table to display IPv6 TCP
connections.
Variable Value
LocalAddress Indicates the local address.
LocalAddressType Indicates the type of the local address.
LocalPort Indicates the local port.
RemAddressType Indicates the type of the remote address.
RemAddress Indicates the remote address.
RemPort Indicates the remote port.
State Enables or disables the state.
Displaying IPv6 TCP listeners using EDM
Use the following procedure to display IPv6
TCP
listeners.
Procedure steps
1. From the navigation tree, double-click IPv6
.
2. In the IPv6 tree, double-click TCP/UDP.
3. On the work area, click the TCP Listeners tab.
4. Click Refresh to update the information.
Variable definitions
Use the data in the following table to display IPv6 TCP
listeners.
Variable Value
LocalAddressType Indicates the local IP address type. Values
include IPv4 or IPv6.
LocalAddress Indicates the local IPv4 or IPv6 address.
Displaying IPv6 TCP listeners using EDM
Configuration — System April 2011 265