Avaya 4526FX - Viewing LLDP Neighbor VLAN Name Information Using EDM; Viewing LLDP Neighbor Protocol Information Using EDM

Viewing LLDP neighbor VLAN name information using EDM
Using the following procedure to display LLDP VLAN name properties for the remote
system.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot1.
5. On the work area, click the Neighbor VLAN Name tab.
Variable definitions
The following table describes the Neighbor VLAN Name tab fields.
Variable Value
TimeMark Indicates the TimeFilter for this entry.
LocalPortNum Identifies the local port on which the remote system
information is received.
Index Indicates the arbitrary local integer value used by this
agent to identify a particular MSAP.
An agent is
encouraged to assign monotonically increasing index
values to new entries, starting with one, after each
reboot.
VlanId Indicates the integer value used to identify the IEEE
802.1Q VLAN IDs with which the remote port is
compatible.
VlanName Indicates the VLAN name identified by the VLAN ID
associated with the remote system.
Viewing LLDP neighbor protocol information using EDM
Use the following procedure to display LLDP
protocol properties for the remote system.
LLDP
Port dot1 configuration using EDM
Configuration — System April 2011 307