Avaya 4526FX - Viewing AES Information Using EDM

Procedure steps
1. From the navigation tree, double-click Power Management
.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the ports tab.
4. Select a Port.
5. In the Port row, double-click the cell in the EnergySaverEnabled column.
6. Select false from the list.
7. Repeat steps 4, 5 and 6 to disable AES for additional ports as required.
8. Click Apply.
9. On the toolbar, you can click Refresh to update the work area data display.
Viewing AES information using EDM
Use the following procedure to display energy saving information for an individual switch or
switches in a stack.
Procedure steps
1. From the navigation tree, double-click Power Management
.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Savings tab.
4. On the toolbar, you can click Refresh update the data.
Variable definitions
Use the data in this table to help you understand the displayed AES information.
Variable Value
Total Indicates the total power saving values for all
switches in a stack.
UnitIndex Indicates the unit number of the switch.
System configuration using Enterprise Device Manager
354 Configuration — System April 2011