Viewing AES scheduling using ACLI
Use the following procedure to review configured energy saving schedule information.
Prerequisites
Log on to the User EXEC mode in ACLI.
Procedure steps
V
iew AES savings by using the following command:
show energy-saver schedule
Job aid: show energy-saver schedule command output
The following figure displays sample output for the show energy-saver schedule
command.
Figure 14: show energy-saver schedule command output
Viewing AES savings using ACLI
Use the
following procedure to review the switch capacity energy saving (Watts) and the PoE
energy saving (Watts).
System configuration using ACLI
206 Configuration — System April 2011
To Next Page
Loading...
