Variable Value
Index Displays a unique identifier for the connected
Avaya IP
phone.
PortPhoneAddressType Displays the IP address type for the Avaya IP phone
connected to the switch port.
PortPhoneAddress Displays the IP address for the Avaya IP phone
connected to the switch port.
PortPhoneAddressMask Displays the IP address subnet mask for the Avaya
IP phone connected to the switch port.
PortPhoneGatewayAddress Displays gateway the IP address for the Avaya IP
phone connected to the switch port.
Global AES configuration using EDM
Use the
information in this section to configure Avaya Energy Saver (AES) for an single switch
or a stack.
Enabling global AES using EDM
Use the following procedure to enable energy saving for the switch.
Procedure steps
1. From the navigation tree, double-click Power Management
.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Select the EnergySaverEnabled check box.
5. On the toolbar, click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.
Variable definitions
The following table describes the Energy Saver Globals tab fields.
System configuration using Enterprise Device Manager
346 Configuration — System April 2011
To Next Page
Loading...
