Viewing LLDP TX statistics using EDM
Use the following procedure to display LLDP transmit statistics by port.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click802.1AB.
4. In the 802.1AB tree, double-click LLDP.
5. On the work area, click the TX Stats tab.
Variable definitions
The following table describes the TX Stats tab fields.
Variable Value
PortNum Indicates the port number
FramesTotal Indicates the number of LLDP frames transmitted by
this LLDP agent on the indicated port
Graphing LLDP transmit statistics using EDM
Use the following procedure to graph LLDP transmit statistics
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click LLDP.
5. On the work area, click the TX Stats tab.
6. In the table, select the port for which you want to display statistics.
7. On the toolbar, click Graph.
LLDP configuration using EDM
Configuration — System April 2011 289
To Next Page
Loading...
