Prerequisites
Log on to the Privileged EXEC mode in ACLI.
Procedure steps
Display Avaya TLV transmit flag configuration information for one or more switch ports
by using the following command in the Interface Configuration mode for one or more
ports:
show lldp [port <portlist>] tx-tlv vendor-specific avaya
Variable definitions
Variable Value
<portlist> Specifies a port or list of ports.
Job aid: show lldp tx-tlv vendor-specific avaya command output
The following
figure displays sample output for the show lldp tx-tlv vendor-specific
avaya command.
Viewing Avaya IP phone IP TLV configuration information using
ACLI
Use this procedure to display IP address configuration information received on switch ports
from connected
Avaya IP phones.
Configuring LLDP using ACLI
Configuration — System April 2011 191
To Next Page
Loading...
