Avaya 4526FX - Show Lldp Med-Network-Policies Command

Variables Description
• dot1: displays status for 802.1 TLVs
• dot3: displays status for 802.3
TLVs
• med: displays status for med TLVs
• vendor-specific:displays vendor specific TLV
information
To display the transmission status of the optional
management TLVs, include only the tx-tlv parameter in
the command.
neighbor {dot1 | dot3 | detail |
med }
The port neighbor TLVs:
• dot1: displays 802.1 TLVs:
• dot3: displays 802.3 TLVs
• detail: displays all TLVs.
• med: displays MED TLVs
• vendor-specific:displays vendor specific TLV
information
[neighbor-mgmt-addr]
The port neighbor LLDP management address.
The switch supports IPv4 and IPv6 management
addresses.
Job aid: show lldp port command output
The following figure displays sample output for the show lldp port command with the tx-tlv
variable.
show lldp med-network-policies command
The show lldp med-network-policies command displays LLDP MED policy
information for switch ports.
The syntax for the show lldp med-network-policies
command is:
Configuring LLDP using ACLI
Configuration — System April 2011 179