8. Highlight a data column to graph.
9. On the toolbar, click a graph button.
Viewing LLDP RX statistics using EDM
Use the following procedure to display LLDP receive statistics by port.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click LLDP.
5. On the work area, click the RX Stats tab.
Variable definitions
The following table describes the RX Stats tab fields.
Variable Value
PortNum Indicates the port number.
FramesDiscardedTotal Indicates the number of LLDP frames received on the
port and discarded for any reason. This counter
provides an indication that LLDP
header formatting
problems exist with the local LLDP agent in the
sending system, or that LLDPDU validation problems
exist with the local LLDP agent in the receiving
system.
FramesErrors Indicates the number of invalid LLDP frames received
on the port, while the LLDP agent is enabled.
FramesTotal Indicates the number of valid LLDP frames received
on the port, while the LLDP agent is enabled.
TLVsDiscardedTotal Indicates the number of LLDP TLVs discarded for any
reason.
TLVsUnrecognizedTotal Indicates the number of LLDP TLVs received on a
given port
that are not recognized by this LLDP agent
on the indicated port. An unrecognized TLV is referred
to as the TLV whose type value is in the range of
reserved TLV types (000 1001–111 1110) in Table 9.1
System configuration using Enterprise Device Manager
290 Configuration — System April 2011
To Next Page
Loading...
