Avaya 4526FX - Configuring the AES Schedule off Time Using EDM

4. Click Insert.
5. To choose a day for the AES schedule on time, select a radio button in the
ScheduleDay section.
6. To choose an hour of the day for the AES schedule on time, type a value in the
ScheduleHour section.
7. To choose a portion of an hour for the AES schedule on time, type a value in the
ScheduleMinute section.
8. To configure the selected day, hour, and minutes as the AES schedule on time,
select the activate radio button in the ScheduleAction section.
Activate is selected by default.
9. Click Insert.
Variable definitions
The following table describes the fields of Insert Energy Saver Schedule screen.
Variable Value
ScheduleDay Indicates the day on which this schedule entry takes effect.
ScheduleHour Indicates the hour on which this schedule entry takes effect.
ScheduleMinute Indicates the Minute on which this schedule entry takes effect.
ScheduleAction Activates or deactivates the energy savings.
Configuring the AES schedule off time using EDM
Use the
following procedure to configure the end of a time interval for the switch to enter lower
power states. The time interval can span a complete week, a complete weekend, multiple days,
or be configured within an individual day.
Prerequisites
Disable AES globally.
Procedure steps
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
AES schedule configuration using EDM
Configuration — System April 2011 351