Avaya 4526FX - Viewing LLDP Neighbor Port Auto-Negotiation Information Using EDM

Variable definitions
The following table describes the Local Max Frame tab fields.
Variable Value
PortNum Indicates the port number.
MaxFrameSize Indicates the maximum frame size for the port.
Viewing LLDP neighbor port auto-negotiation information using
EDM
Use the following procedure to display LLDP auto-negotiation properties for the remote
system.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot3.
5. On the work area, click the Neighbor Port Auto-negotiation tab.
Variable definitions
The following table describes the Neighbor Port Auto-negotiation tab fields.
Variable Value
TimeMark Indicates the TimeFilter for this entry.
LocalPortNum Indicates the local port on which the remote system
information is received.
Index Indicates the arbitrary local integer value used by this
agent to identify a particular MSAP. An agent is
encouraged to assign monotonically increasing index
values to new entries, starting with one, after each
reboot.
System configuration using Enterprise Device Manager
312 Configuration — System April 2011