Avaya 4526FX - Configuring an Ipv6 Default Gateway for the Switch or Stack; Displaying the Ipv6 Default Gateway; Configuring the Ipv6 Neighbor Cache

Field Default setting
icmp-error-interval 1000
icmp-error-quota 50
icmp-redirect-msg disabled
icmp-unreach-msg disabled
multicast-admin-status disabled
Configuring an IPv6 default gateway for the switch or stack
1. Enter the following command to configure a default gateway
.
ipv6 default-gateway <ipv6_gateway address>
2. Enter the following command to disable a default gateway.
no ipv6 default-gateway
Displaying the IPv6 default gateway
Use the following procedure to display the IPv6 address for the default gateway:
Enter the following command:
show ipv6 default-gateway
Configuring the IPv6 neighbor cache
Use the following procedure to add or remove a static neighbor cache entry:
1.
Enter the following command to add a static neighbor cache entry.
ipv6 neighbor <ipv6_address> port <unit/port> mac <H.H.H>
2.
Enter the following command to remove a static neighbor cache entry.
no ipv6 neighbor <ipv6_address>
Configuring IPv6
Configuration — System April 2011 121