Avaya 4526FX - Viewing LLDP Local Protocol VLAN Information Using EDM

3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot1.
5. On the work area, click the Local VLAN Id tab.
Variable definitions
The following table describes the Local VLAN Id tab fields.
Variable Value
PortNum Indicates the port number.
VlanId Indicates the local port VLAN ID. A value of zero is
used if the system does not know the PVID.
Viewing LLDP local protocol VLAN information using EDM
Use the following procedure to display LLDP local protocol VLAN properties for the local
system and to enable or disable the transmission of this information from a specified port.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot1.
5. On the work area, click the Local Protocol VLAN tab.
6. To select a port to edit, click the port row.
7. In the port row, double-click the cell in the ProtoVlanTxEnable column.
8. Select a value from the list—true to enable transmitting local port and protocol
VLAN information from the port, or false to disable transmitting local port and
protocol VLAN information from the port.
9. Click Apply .
Variable definitions
The following table describes the Local Protocol VLAN tab fields.
System configuration using Enterprise Device Manager
302 Configuration — System April 2011