Viewing PoE conservation level support TLV information using
ACLI
Use this
procedure to display PoE conservation level information received on switch ports from
an Avaya IP phone.
Prerequisites
Log on to the Privileged EXEC mode in ACLI.
Procedure steps
Display the received PoE conservation level information for one or more switch ports
by using the following command:
show
lldp
[port
<portlist>]
neighbor
vendor-specific
avaya
poe-
conservation
Variable definitions
Variable Value
<portlist> Specifies a port or list of ports.
Configuring the switch call server IP address TLV using ACLI
Use this procedure to define the local call server IP addresses that switch ports advertise to
A
vaya IP phones.
You can define IP addresses for a maximum of 8 local call servers.
Important:
The switch does not support the advertisement of IPv6 addresses to A
vaya IP phones.
System configuration using ACLI
182 Configuration — System April 2011
To Next Page
Loading...
