Prerequisites
Log on to the User EXEC mode in ACLI.
Procedure steps
Enter the following command:
show usb-files [dir <WORD> | tree | unit <1-8>
T
able 30: show usb-files parameters
Parameter Description
dir <WORD> Specifies a directory in which to locate USB
files to display.
tree Specifies subdirectories. .
unit <1-8> The number of the switch unit within a
stack.
Job aid
Following is an output example for the show usb-files command:
ERS4500#show usb-files
USB file list - Stand-alone
Listing Directory USB_BULK:
657 Feb 17 2009 IP.CFG
6217432 Mar 3 2009 4500_53044.img
1589514 Feb 25 2009 4500_5303.bin
2048 Mar 4 2009 ABC/
Viewing USB host port information
Use this procedure to view USB host port information. Y
ou can display the USB host port
information for a unit in a stack.
Configuration files in ACLI
Configuration — System April 2011 95
To Next Page
Loading...
