Avaya 4526FX - Viewing the Avaya TLV Transmit Flag Status Using EDM

Variable Value
Important:
Only Ethernet ports on switches that support
PoE can request a specific power conservation
level for an Avaya IP phone.
callServer Enables or disables the TLV for advertising call
server IPv4 addresses to an Avaya IP phone
connected to the switch port.
fileServer Enables or disables the TLV for advertising file
server IPv4 addresses to an Avaya IP phone
connected to the switch port.
framingTlv Enables or disables the frame tagging TLV for
exchanging Layer 2 priority tagging information
between the switch and an Avaya IP phone.
Viewing the Avaya TLV transmit flag status using EDM
Use this procedure to display the status of transmit flags for switch ports on which
A
vaya IP
phone support TLVs are configured.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Port Config tab.
Variable definition
Variable Value
poeConservationLevel When displayed, indicates that the TLV for requesting
a specific power conservation level for an A
vaya IP
phone is enabled on the switch port.
Important:
Only Ethernet ports on switches that support PoE
can request a specific power conservation level for
an Avaya IP phone.
callServer When displayed, indicates that call server IPv4
address advertisement to an Avaya IP phone is
enabled on the switch port.
System configuration using Enterprise Device Manager
334 Configuration — System April 2011