Field Description
Index Indicates the arbitrary local integer value
used by this agent to identify a particular
MSAP.
An agent is encouraged to assign
monotonically increasing index values to
new entries, starting with one, after each
reboot.
CapSupported Identifies the MED system capabilities
supported on the remote system.
CapCurrent Identifies the MED system capabilities that
are enabled on the remote system.
DeviceClass Indicates the remote MED device class.
Viewing neighbor policies using EDM
Use this procedure to display LLDP policy information for the remote system.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor Policy tab.
Variable definitions
The following table describes the Neighbor Policy tab fields.
Field Description
TimeMark Indicates the TimeFilter for this entry.
LocalPortNum Identifies the local port on which the remote
system information is received.
Index Indicates the arbitrary local integer value
used by this agent to identify a particular
MSAP.
An agent is encouraged to assign
monotonically increasing index values to
new entries, starting with one, after each
reboot.
LLDP Port MED configuration using EDM
Configuration — System April 2011 325
To Next Page
Loading...
