Prerequisites
Log on to the User EXEC mode in ACLI.
Procedure steps
V
iew the global AES configuration by using the following command:
show energy-saver
Job aid: show energy-saver command output
The following figure displays sample output for the show energy-saver command.
Figure 16: show energy-saver command output
Viewing port-based AES configuration using ACLI
Use the following procedure to review AES configuration for all ports on the switch, an
individual port, or range of ports.
Prerequisites
Log on to the User EXEC mode in
ACLI.
Procedure steps
View AES savings by using the following command:
System configuration using ACLI
208 Configuration — System April 2011
To Next Page
Loading...
