Avaya 4526FX - Viewing LLDP Local Port Information Using EDM

Variable Value
HardwareRev Indicates the vendor-specific hardware revision
string.
FirmwareRev Indicates the vendor-specific firmware revision
string.
SoftwareRev Indicates the vendor-specific software revision string.
SerialNum Indicates the vendor-specific serial number.
MfgName Indicates the vendor-specific manufacturer name.
ModelName Indicates the vendor-specific model name.
AssetID Indicates the vendor-specific asset tracking identifier
DeviceType Defines the type of Power-via-MDI (PoE).
• pseDevice
•
pdDevice
• none
PDPowerSource Defines the type of PD Power Source.
PDPowerReq Specifies the value of the power required in 0.1 W
increments by a PD.
PSEPowerSource Defines the type of PSE Power Source (primary or
back-up).
PDPowerPriority Defines the Powered Device (PD) power priority.
• critical
• high
• low
Viewing LLDP local port information using EDM
Use the following procedure to display LLDP port properties for the local system.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
LLDP configuration using EDM
Configuration — System April 2011 293