Avaya 4526FX - Viewing LLDP Unknown TLV Information Using EDM

Variable Value
Note:
If you configure both IPv4 and IPv6 management
addresses, the switch displays each on a separate
row.
AddrIfSubtype Indicates the numbering method used to define the
interface number associated with the remote system.
• unknown
• ifIndex
• systemPortNumber
AddrIfId Indicates the integer value used to identify the
interface number of the management address
component associated with the remote system.
AddrOID Indicates the value used to identify the type of
hardware component or protocol entity associated
with the management address advertised by the
remote system agent.
Viewing LLDP unknown TLV information using EDM
Use the following procedure to display details about unknown
TL
Vs received on the local
system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click LLDP.
5. On the work area, click the Unknown TLV tab.
Variable definitions
The following table describes the Unknown TLV tab fields.
Variable Value
TimeMark Indicates the TimeFilter for this entry.
LLDP configuration using EDM
Configuration — System April 2011 299