Avaya 4526FX - Displaying Ipv6 UDP Endpoints Using EDM; Viewing SFP GBIC Ports Using EDM

Variable Value
Local Port Indicates the local port.
Displaying IPv6 UDP endpoints using EDM
Use the following procedure to display IPv6 UDP
endpoints.
Procedure steps
1. From the navigation tree, double-click IPv6
.
2. In the IPv6 tree, double-click TCP/UDP.
3. On the work area, click the UDP Endpoints tab.
4. Click Refresh to update the information.
Variable definitions
Use the data in the following table to display IPv6 UDP endpoints.
Variable Value
LocalAddressType Indicates the local address.
LocalAddress Indicates the local address port.
Local Port Indicates the local port.
RemoteAddressType Indicates the remote address type.
RemoteAddress Indicates the remote address.
RemotePort Indicates the remote port.
Instance Indicates the instance.
Process Indicates the process.
Viewing SFP GBIC ports using EDM
Use the following procedure to view the SFP GBIC ports.
System configuration using Enterprise Device Manager
266 Configuration — System April 201
1