Avaya 4526FX - Viewing Local Link Aggregate Tab Using EDM

4. In the 802.1AB tree, double-click Port dot3.
5. On the work area, click the Local PoE tab.
Variable definitions
The following table describes the Local PoE tab fields.
Variable Value
PortNum Indicates the port number.
PowerPortClass Indicates the port Class of the local port.
PowerMDISupported Indicates whether MDI power is supported on the local
port.
PowerMDIEnabled Indicates whether MDI power is enabled on the local
port.
PowerPairControlable Indicates the value derived from the value of the
pethPsePortPowerPairsControlAbility object (defined
in IETF RFC 3621), this value is used to indicate
whether pair selection can be controlled on the local
port.
PowerPairs Contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) for the local port:
• signal
•
spare
PowerClass Contains the value of the
pethPsePortPowerClassifications object (defined in
IETF RFC 3621) for the local port:
• class0
• class1
• class2
• class3
• class4
Viewing Local Link Aggregate tab using EDM
Use the following procedure to display LLDP link aggregation properties for the local
system.
System configuration using Enterprise Device Manager
310 Configuration — System April 201
1