Avaya 4526FX - Viewing LLDP Local Poe Information Using EDM

Procedure steps
1. From the navigation tree, double-click Edit
.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot3.
5. On the work area, click the Local Port Auto-negotiation tab.
Variable definitions
The following table describes the Local Port Auto-negotiation tab fields.
Variable Value
PortNum Indicates the port number.
AutoNegSupported Indicates whether the local port supports Auto-
negotiation.
AutoNegEnabled Indicates whether Auto-negotiation is enabled on the
local port.
AutoNegAdvertisedCap Contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in
IETF RFC 3636) associated with the local port on the
system.
OperMauType Indicates the value that indicates the operational MAU
type of the given port on the local system.
Viewing LLDP local PoE information using EDM
Use the following procedure to display LLDP PoE properties for the local system.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
LLDP Port dot3 configuration using EDM
Configuration — System April 2011 309