Avaya 4526FX - Viewing Remote IP TLV Information Using EDM

Variable Value
Dot1QFraming Displays the Layer 2 frame tagging mode for the
Avaya IP
phone connected to the switch port.
Values include:
• tagged—frames are tagged based on the tagging
value the Avaya IP phone receives with the
LLDP-MED Network Policy TLV.
• non-tagged—frames are not tagged with 802.1Q
priority.
• auto—an attempt is made to tag frames based
on the tagging value the Avaya IP phone receives
with the LLDP-MED Network Policy TLV. If there
is no LLDP-MED Network Policy information
available, an attempt is made to tag frames
based on server configuration. If that fails, traffic
is transmitted untagged.
• The default tagging mode is auto.
Viewing remote IP TLV information using EDM
Use this procedure to display IP address configuration information received on switch ports
from connected
Avaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Neighbor IP Phone tab.
Variable definition
Variable Value
TimeMark Displays the time the latest TLV-based information
is received from an A
vaya IP phone.
LocalPortNum Displays the number of the switch port on which the
TLV-based information is received.
Viewing remote IP TLV information using EDM
Configuration — System April 2011 345