Avaya 4526FX - Displaying Ipv6 TCP Connections Using EDM

Procedure steps
1. From the navigation tree, double-click IPv6
.
2. In the IPv6 tree, double-click TCP/UDP.
3. On the work area, click the TCP Globals tab.
4. Click Refresh to update the information.
Variable definitions
Use the data in the following table to display IPv6 TCP
global properties.
Variable Value
RtoAlgorithm Indicates the algorithm identifier.
RtoMin Indicates the minimum value in
milliseconds.
RtoMax Indicates the maximum value in
milliseconds.
MaxConn Indicates the maximum number of
connections.
Displaying IPv6 TCP connections using EDM
Use the following procedure to display IPv6
TCP
connections.
Procedure steps
1. From the navigation tree, double-click IPv6
.
2. In the IPv6 tree, double-click TCP/UDP.
3. On the work area, click the TCP Connections tab.
4. Click Refresh to update the information.
System configuration using Enterprise Device Manager
264 Configuration — System April 2011