Variable Value
MfgName Indicates the vendor-specific manufacturer
name as advertised by the remote device.
ModelName Indicates the vendor-specific model name as
advertised by the remote device.
AssetID Indicates the vendor-specific asset tracking
identifier as advertised by the remote
device.
Enabling or disabling Avaya TLV transmit flags using EDM
Use this procedure to enable or disable the transmission of optional proprietary
A
vaya TLVs
from switch ports to Avaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Port Config tab.
6. To select a port, click the PortNum.
7. In the port row, double-click the cell in the TLVsTxEnable column.
8. Select a checkbox to enable a TLV.
OR
Clear a checkbox to disable a TLV.
9. Click Ok.
10. On the toolbar, click Apply.
Variable definition
Variable Value
poeConservationLevel Enables or disables the TLV for requesting a
specific power
conservation level for an Avaya IP
phone connected to the switch port.
Enabling or disabling Avaya TLV transmit flags using EDM
Configuration — System April 2011 333
To Next Page
Loading...
