Variable Value
weekday Disables AES scheduling for all weekdays.
weekend Disables AES scheduling for Saturday and
Sunday.
<hh:mm> Specifies the scheduled AES start time (hour
and minutes).
Configuring AES scheduling to default using ACLI
Use the following procedure to completely disable scheduling for the switch or to disable
specific energy saver schedules.
Prerequisites
•
Log on to the Global Configuration mode in
ACLI.
• Disable AES globally.
Procedure steps
Configure AES scheduling by using the following command:
default energy-saver schedule
Variable definitions
The following table defines optional parameters that you can enter after the default
energy-saver schedule command.
Variable Value
friday|monday|saturday|
sunday|thursday|tuesday|
wednesday
Configures AES scheduling for a specific day
to default (disabled).
weekday Configures AES scheduling for all weekdays
to default (disabled).
weekend Configures AES scheduling for Saturday and
Sunday to default (disabled).
<hh:mm> Specifies the scheduled AES start time (hour
and minutes).
AES configuration using ACLI
Configuration — System April 2011 205
To Next Page
Loading...
