Prerequisites
• Disable
AES globally.
• Log on to the Privileged EXEC mode in ACLI.
Procedure steps
1. Activate AES by using the following command:
energy-saver activate
2. Deactivate AES by using the following command:
energy-saver deactivate
Configuring AES scheduling using ACLI
Use the
following procedure to configure an on and off time interval for the switch to enter lower
power states. The time interval can be a complete week, complete weekend, or individual
days.
Prerequisites
• Log on to the Global Configuration mode in ACLI.
• Disable AES globally.
Procedure steps
Configure AES scheduling by using the following command:
energy-saver schedule {weekday|weekend|monday|tuesday |
wednesday|thursday|friday|saturday|sunday} <hh:mm> {activate|
deactivate}
Variable definitions
The following table defines parameters that you can enter with the energy-saver schedule
{weekday|weekend|monday|tuesday |wednesday|thursday|friday|saturday|
sunday} <hh:mm> {activate|deactivate} command.
AES configuration using ACLI
Configuration — System April 2011 203
To Next Page
Loading...
