8. Click Close to close the dialog box.
9. Click Apply
.
Adding civic address location information using EDM
Use this procedure to add civic address-based location information to the neighbor location
table.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor Location tab.
6. In the table, select a location with the LocationSubtype listed as civicAddress.
7. On the toolbar, click the Location Details button.
The Insert Local Location dialog box appears.
8. Click Close to close the dialog box.
9. Click Apply .
Viewing neighbor PoE information using EDM
Use this procedure to display LLDP PoE properties for the remote system.
Procedure steps
1.
From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor PoE tab.
Variable definitions
The following table describes the Neighbor PoE tab fields.
System configuration using Enterprise Device Manager
328 Configuration — System April 2011
To Next Page
Loading...
