Variable definitions
The following table describes the Neighbor Location tab fields.
Variable Value
TimeMark Indicates the TimeFilter for this entry.
LocalPortNum Identifies the local port on which the remote
system information is received.
Index Indicates the arbitrary local integer value
used by this agent to identify a particular
MSAP.
An agent is encouraged to assign
monotonically increasing index values to
new entries, starting with one, after each
reboot.
LocationSubtype Indicates the location subtype advertised by
the remote device:
• unknown
• coordinateBased
• civicAddress
• elin
LocationInfo Indicates the location information advertised
by the remote device. The parsing of this
information depends on the location
subtype.
Adding coordinate-based neighbor location information using EDM
Use this procedure to add coordinate-based location information to the neighbor location
table.
Procedure steps
1. From the navigation tree, double-click Edit
.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor Location tab.
6. In the table, select a location with the LocationSubtype listed as
coordinateBased.
7. On the toolbar, click the Location Details button.
The Insert Local Location dialog box appears.
LLDP Port MED configuration using EDM
Configuration — System April 2011 327
To Next Page
Loading...
