3. In the work area, click the Energy Saver Schedules tab.
4. Click Insert.
5. To choose a day for the AES schedule off time, select a radio button in the
ScheduleDay section.
6. To choose an hour of the day for the AES schedule off time, type a value in the
ScheduleHour section.
7. To choose a portion of an hour for the AES schedule off time, type a value in the
ScheduleMinute section.
8. To configure the selected day, hour, and minutes as the AES schedule off time,
select the deactivate radio button in the ScheduleAction section.
Activate is selected by default.
9. Click Insert.
Modifying an AES schedule on and off time status using EDM
Use the following procedure to change an existing schedule off time to on time or to change
an existing schedule on time to of
f time.
Prerequisites
Disable AES globally.
Procedure steps
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Schedules tab.
4. To select a schedule time to edit, click a schedule day.
5. In the schedule day row, double-click the cell in the ScheduleAction column.
6. Select a value from the list—activate to configure the schedule time as the on time,
or deactivate to configure the schedule time as the off time.
7. Click Apply.
System configuration using Enterprise Device Manager
352 Configuration — System April 2011
To Next Page
Loading...
