Variable Value
file-server Enables the file server TLV transmit flag.
poe-conservation Enables the PoE conservation request TLV
transmit flag.
<portList> Specifies a port or list of ports.
Disabling Avaya TLV transmit flags using ACLI
Use this
procedure to disable the transmission of optional proprietary Avaya TLVs from switch
ports to Avaya IP phones.
The switch transmits configured Avaya TLVs only on ports with the TLV transmit flag
enabled.
Prerequisites
Log on to the Interface Configuration mode in ACLI.
Procedure steps
Disable Avaya TLVs that the switch transmits by using the following command:
no lldp tx-tlv [port <portList>] vendor-specific avaya {[poe-
conservation] [call-server] [file-server] [dot1q-framing]}
Variable definitions
Variable Value
call-server Disables the call server TLV transmit flag.
dot1q-framing Disables the Layer 2 priority tagging TLV transmit
flag.
file-server Disables the file server TLV transmit flag.
poe-conservation Disables the PoE conservation request TLV
transmit flag.
<portList> Specifies a port or list of ports.
Viewing the Avaya TLV transmit flag status using ACLI
Use this procedure to display the status of transmit flags for switch ports on which A
vaya IP
phone support TLVs are configured.
System configuration using ACLI
190 Configuration — System April 2011
To Next Page
Loading...
