Avaya 4526FX - Page 201

Prerequisites
Log on to the Global Configuration mode in ACLI.
Procedure steps
Configure global
AES by using the following command:
[no] [default] energy-saver [enable] [efficiency-mode] [poe-
power-saving]
Variable definitions
The following table defines optional parameters that you can enter with the [no] [default]
energy-saver [enable] [efficiency-mode] [poe-power-saving] command.
Variable Value
[default] Configures AES efficiency mode, POE
power saving,
or global AES to default values
(disabled).
efficiency-mode Enables AES efficiency mode.
Important:
Y
ou must ensure that SNTP
is enabled
before you can enable AES efficiency
mode.
Important:
You
must disable AES globally before you
can modify AES efficiency mode.
Important:
When enabled, AES ef
ficiency mode
overrides custom AES scheduling and
PoE power saving mode. You will be
prompted to confirm that you want to
enable AES efficiency mode before
proceeding.
enable Enables AES globally.
[no] Disables AES efficiency mode, POE power
saving, or AES globally
.
poe-power-saving Enables POE power saving.
AES configuration using ACLI
Configuration — System April 2011 201