Avaya 4526FX - Page 232

Procedure steps
1. From the navigation tree, double-click Edit
.
2. In the Edit tree, double-click Chassis.
3. Double-click Ports.
4. In the work area, click the Interface tab.
5. To select an interface port to edit, click the Index.
6. In the port row, double-click the cell in the Name column.
7. Type a character string.
8. In the port row, double-click the cell in the AdminStatus column.
9. Select a value from the list.
10. In the port row, double-click the cell in the LinkTrap column.
11. From the list, enable or disable link traps for the port.
12. In the port row, double-click the cell in the AutoNegotiate column.
13. Select a value from the list—true to enable autonegotiation for the port, or false to
disable autonegotiation for the port.
14. In the port row, double-click the cell in the AdminDuplex column.
15. Select a value from the list.
16. In the port row, double-click the cell in the AdminSpeed column.
17. Select a value from the list.
18. In the port row, double-click the cell in the AutoNegotiationAdvertisments
column.
19. Select or clear autonegotiation advertisement check boxes.
20. Repeat steps 6 through 20 to change the configuration for additional interface
ports.
21. Click Ok .
22. Click Apply .
Variable definitions
Use the data in this table to modify configuration parameters for one or more interface ports.
System configuration using Enterprise Device Manager
232 Configuration — System April 2011