Variable Value
• upldConfig—uploads a
configuration from the switch to
a designated location.
• dnldConfigFromUsb—downloads a configuration to
switch using the front panel USB port.
• upIdConfigToUsb—uploads a configuration from the
switch to the server using the front panel USB port.
• dnldImg—downloads a new software image to the
switch. This option replaces the software image on the
switch regardless of whether it is newer or older than
the current image.
• dnldImgIfNewer—downloads a new software image to
the switch only if it is newer than the one currently in
use.
• dnldImgNoReset—downloads a new software image to
the switch. This option replaces the software image on
the switch regardless of whether it is newer or older
than the current image. After the download is complete,
the switch is not reset.
• dnldImgFromUsb—downloads a new software image
to the switch using the front panel USB port.
• dnldFw—downloads a new diagnostic software image
to the switch. This option replaces the image regardless
of whether it is newer or older than the current image.
• dnldFwNoReset—downloads a new diagnostic
software image to the switch. This option replaces the
image regardless of whether it is newer or older than
the current image. After the download is complete, the
switch is not reset.
• dnldFwFromUsb—downloads a new diagnostic
software image to the switch from the front panel USB
port. This option replaces the image regardless of
whether it is newer or older than the current image.
Status Displays the status of the last action that occurred since
the switch last booted. Values include:
• other—no action occurred since the last boot.
• inProgress—the selected operation is in progress.
• success—the selected operation succeeded.
• fail—the selected operation failed.
System configuration using Enterprise Device Manager
242 Configuration — System April 2011
To Next Page
Loading...
