3. On the work area, click the Interfaces tab.
4. In the table, select the IfIndex you want to view.
5. On the toolbar, click Graph.
Variable definitions
The following table defines the variables for the Static Routes window
Variable Value
InReceives Indicates the total number of input
datagrams received from interfaces,
including those received in error.
InHdrErrors Indicates the number of input datagrams
discarded due to errors in their IP headers,
including bad checksums, version number
mismatch, other format errors, time-to-live
exceeded, errors discovered in processing
their IP
options.
InNoRoutes Indicates the number of input IP datagrams
discarded because no route is found to
transmit them to their destination.
InAddrErrors Indicates the number of input datagrams
discarded because the IP address in their IP
header's destination field was not a valid
address to be received at this entity. This
count includes invalid addresses (for
example, 0.0.0.0) and addresses of
unsupported Classes (for example, Class E).
For entities which are not IP Gateways and
therefore do not forward datagrams, this
counter includes datagrams discarded
because the destination address was not a
local address.
InUnknownProtos Indicates the number of locally-addressed
datagrams received successfully but
discarded because of an unknown or
unsupported protocol.
InTruncatedPkts Indicates the number of input IP datagrams
discarded because the datagram frame did
not carry enough data.
InDiscards Indicates the number of input IP datagrams
for which no problems were encountered to
prevent their continued processing, but
which were discarded (for example, for lack
System configuration using Enterprise Device Manager
254 Configuration — System April 2011
To Next Page
Loading...
