Variable definitions
The following table describes the Local Management tab fields.
Variable Value
AddrSubtype Indicates the type of management address identifier
encoding used in the associated Addr object.
Addr Indicates the string value used to identify the
management address
component associated with the
local system. This address is used to contact the
management entity. The switch supports IPv4 and
IPv6 management addresses.
Note:
If you configure both IPv4 and IPv6 management
addresses, the switch displays each on a separate
row.
AddrLen Indicates the total length of the management address
subtype and the management address fields in
LLDPDUs transmitted by the local LLDP agent. The
management address length field is needed so that
the receiving systems that do not implement SNMP
are not required to implement the family numbers/
address length equivalency table to decode the
management address.
AddrIfSubtype Identifies the numbering method used to define the
interface number associated with the remote system.
• unknown
• ifIndex
• systemPortNumber
AddrIfId Indicates the integer value used to identify the
interface number of the management address
component associated with the local system.
AddrOID Indicates the value used to identify the type of
hardware component or protocol entity associated
with the management address advertised by the local
system agent.
AddrPortsTxEnable Specifies the ports on which the local system
management address TLVs are transmitted in the
LLPDUs.
LLDP configuration using EDM
Configuration — System April 2011 295
To Next Page
Loading...
