Avaya 4526FX - Page 48

Type Unit Time
Idx
Src Message
----
I
----
1
------------
00:00:00:30
------
5
---------------
ASCII transfer
failed, Addr:
10.3.2.137, File:
config.txt. File
not found.
Example message for USB usage:
Type Unit Time
Idx
Src Message
----
I
----
1
------------
00:00:00:30
------
6
---------------
ASCII transfer
failed, from USB,
File: config.txt.
Error accessing
USB/ASCII file.
2.
Connection error on load on boot
(ACG_DOWNLOAD_ERROR_ON_BOOT)
The
message
describes the situation in which the connection failed at load on boot,
therefore the ASCII Configuration File could not be accessed or used. The IP and
the filename will be in the message in case of a TFTP server usage, or the filename
in case of a USB usage. The message also contains the cause of the error the same
as the one displayed to the CLI. There are some cases in which the IP number is
unknown, therefore the “?” sign will be used.
Example message for TFTP server usage:
Type Unit Time
Idx
Src Message
----
I
----
1
------------
00:00:00:30
------
5
---------------
ASCII transfer
failed at load on
boot, Addr:
10.3.2.137, File:
config.txt. File
not found.
Example message for USB usage:
System configuration fundamentals
48 Configuration — System April 2011