11. Make
sure the width of the loaded roll is displayed in the B Roll Width list—in this case, ISO A2/A3
(420.0mm).
Note
• If
the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer In-
formation on the Main pane to update the printer information.
12. Make sure C Page Size shows the original size as specified in C Paper Size in the Page Attributes dialog box
—in this case, ISO A4 - Oversize.
13. Confirm the print settings, and then click MPrint to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Mac OS X) →P.407 "
Enhanced Printing Options
>
Printing at full size
>
Printing at Full Size (Mac OS X) iPF825
3
86
To Next Page
Loading...
