Canon iPF825 - Borderless Printing by Resizing Originals to Match the Paper Size (Mac os X)

10. Select the BBorderless Printing check box to display the Information dialog box.
11. Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12. Click OK to close the Information dialog box.
13. In CBorderless Printing Method, click D Fit Paper Size.
14. Click Match Page Size in the GPaper Size list.
15. Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Windows)
→P.196 "
Important
• When Automatically
switch paper sources (paper size priority) is enabled on the Device Settings
sheet, Fit Paper Size cannot be selected in Borderless Printing Method.
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following
example.
• Document: Any Type
• Page size: 10×12 inches (254.0×304.8 mm)
• Paper: Roll paper
• Paper type: Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
Enhanced Printing Options
> Borderless Printing >
iPF825 Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
3
97