EasyManua.ls Logo

Canon iPF825 - Paper Loaded Askew

Canon iPF825
888 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
"Manually rewind the roll all the way and press OK."
Cause Corrective Action
A paper jam occurred
when advancing the
paper.
1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2. If "Not
finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Paper loaded askew.
Cause Corrective Action
Paper is loaded askew. Follow these steps to reload the roll.
1. Lift the Release Lever.
2. Open the Top Cover.
3. Adjust
the right edge of the roll to make it parallel to the
right Paper Alignment Line.
4. Lower the Release Lever.
5. Close the Top Cover.
(See "Loading Rolls in the Printer.")
→P.588
If this error recurs after you reload the roll, remove the Roll
Holder from the printer, push the roll firmly in until it
touches the Roll Holder flange, and reload the Roll Holder
in the printer.
(See "Attaching the Roll Holder to Rolls.") →P.584
Follow these step to reload a sheet.
1. Lift the Release Lever.
2. Open the Top Cover.
3. Adjust
the right edge of the sheet to make it parallel to
the right Paper Alignment Line and the trailing edge of
the sheet to make it parallel to the paper alignment line
under the Paper Retainer.
4. Lower the Release Lever.
5. Close the Top Cover.
(See "Loading Sheets in the Printer.")
→P.616
Note
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off
or
Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams because paper
may be askew when it is printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.
Paper cutting failed.
Cause Corrective Action
There are sheets left on the
Ejection Guide.
1. Lift the Release Lever and remove the paper.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Error Message
>
Messages regarding paper
>
iPF825 Paper loaded askew.
13
831

Table of Contents

Related product manuals