Choosing the Document Type and Printing Conditions (Mac OS X)
You can specify your own print settings instead of using the Print Target presets. As an example, this topic describes
how to print CAD drawings as clearly as possible, with sharp lines and text.
1. This sets the BFormat for and C Paper Size.
Note
• The configuration method varies depending on the OS and application software you are using.
If Page
Setup is displayed in the application menu, the settings are configured by opening the
Page Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer driver displayed
when you select Print from the application software menu.
2. Select the printer in the APrinter list.
3. Choose the original size in the FPaper Size list.
4. If
you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and
then select Print from the application software menu.
Enhanced Printing Options
>
Adjusting Images
>
Choosing the Document Type and Printing Conditions (Mac OS X) iPF825
3
58
To Next Page
Loading...
