Printing does not start
The Data lamp on the Control Panel does not light up ............................................................................. 797
The printer does not respond even if print jobs are sent ........................................................................... 797
Ink Filling.. is displayed ............................................................................................................................. 797
The display screen indicates Agitating ...................................................................................................... 797
The Data lamp on the Control Panel does not light up
Cause Corrective Action
The printer is not on. Make sure the power cord is securely plugged in, all the way. Press the Power
button to turn on the printer.
The target printer was not selec-
ted when printing. (The printer
is in Sleep mode.)
In Windows, select the printer by clicking Select Printer or Printer in the print-
ing dialog box and try printing again.
In Mac OS X, open the dialog box of the printer driver, select the printer from
the list of Printer, and try printing again.
The print job is paused. (The
printer is in Sleep mode.)
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers ) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax.
(This is identified as Printer Setup Utility or Print Cen-
ter in other versions of Mac OS X.)
2. Select the printer, and then Resume Printer (or Start Jobs ) in the Printers
menu to restart the print job.
The printer does not respond even if print jobs are sent
Cause Corrective Action
The printer is offline. Press the Online button on the Control Panel to bring the printer
online.
You have printed when select Save in mail
box is selected in Output Method.
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.") →P.538
Ink Filling.. is displayed
Cause Corrective Action
The printer was forced off during op-
eration.
Wait until the system has been filled with ink. This process may take
about ten minutes.
The display screen indicates Agitating
Cause Corrective Action
Ink agitation is in
progress.
The time for agitation varies depending on how long the printer has been turned off. (Be-
tween about a minute and a half to twenty minutes.) During agitation, you can print or do
other operations after the printer goes Online.
Troubleshooting
>
Printing does not start
>
iPF825 The Data lamp on the Control Panel does not light up
12
797
To Next Page
Loading...
